![]() ![]() Step 5 :Mount the Smart Switch onto the wall box using the two screws provided, and snap on the included wall plate or attach your existing one. Neverconnect the Neutral line to any Switch lines.Note: The following wiring scenarios may be dangerous or illegal. Green wire on switch (Ground line) to Ground line, White wire on switch (Neutral line) to Neutral line. Step 4 :Connect the Smart Switch wiring with the provided wire connectors as follows.Ĭonnect each of the two black wires from the switch to the available Live linesvia the wire nut, and wrap electrical tape around the wire nuts to make sure the copper conductor Step 3 :Remove existing faceplate and light switch, then identify Live/Load, Neutral and Groundlines. Use voltage tester to confirm no voltage is present. Step 2: Turn offpower at the circuit breaker that controls the light switch. If you have met the electrical requirements, proceed with the electrical installation instructions below. Due to TP-Link smart switch need to be configured by Wi-Fi, it can only be installed in non-metal faceplates and dry indoor locations. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |